Terms and definitions on affordable and sustainable housing *

Energy Retrofit

Area: Design, planning and building

Buildings are responsible for approximately 40% of energy consumption and 36% of greenhouse gas emissions in the EU (European Commission, 2021). Energy retrofit is also referred to as building energy retrofit, low carbon retrofit, energy efficiency retrofit and energy renovation; all terms related to the upgrading of existing buildings energy performance to achieve high levels of energy efficiency. Energy retrofit significantly reduces energy use and energy demand (Femenías et al., 2018; Outcault et al., 2022), tackles fuel (energy) poverty, and lowers carbon emissions (Karvonen, 2013). It is widely acknowledged that building energy retrofit should result in a reduction of carbon emissions by at least 60% compared with pre-retrofit emissions, in order to stabilise atmospheric carbon concentration and mitigate climate change (Fawcett, 2014; Outcault et al., 2022). Energy retrofit can also improve comfort, convenience, and aesthetics (Karvonen, 2013). There are two main approaches to deep energy retrofit, fabric-first and whole-house systems. The fabric-first approach prioritises upgrades to the building envelope through four main technical improvements: increased airtightness; increased thermal insulation; improving the efficiency of systems such as heating, lighting, and electrical appliances; and installation of renewables such as photovoltaics (Institute for Sustainability & UCL Energy Institute, 2012). The whole-house systems approach to retrofit further considers the interaction between the climate, building site, occupant, and other components of a building (Institute for Sustainability & UCL Energy Institute, 2012). In this way, the building becomes an energy system with interdependent parts that strongly affect one another, and energy performance is considered a result of the whole system activity. Energy retrofit can be deep, over-time, or partial (Femenías et al., 2018). Deep energy retrofit is considered a onetime event that utilises all available energy saving technologies at that time to reduce energy consumption by 60% - 90% (Fawcett, 2014; Femenías et al., 2018). Over-time retrofit spreads the deep retrofit process out over a strategic period of time, allowing for the integration of future technologies (Femenías et al., 2018). Partial retrofit can also involve several interventions over time but is particularly appropriate to protect architectural works with a high cultural value, retrofitting with the least-invasive energy efficiency measures (Femenías et al., 2018). Energy retrofit of existing social housing tends to be driven by cost, use of eco-friendly products, and energy savings (Sojkova et al., 2019). Energy savings are particularly important in colder climates where households require greater energy loads for space heating and thermal comfort and are therefore at risk of fuel poverty (Sojkova et al., 2019; Zahiri & Elsharkawy, 2018). Similarly, extremely warm climates requiring high energy loads for air conditioning in the summer can contribute to fuel poverty and will benefit from energy retrofit (Tabata & Tsai, 2020). Femenías et al’s (2018) extensive literature review on property owners’ attitudes to energy efficiency argues that retrofit is typically motivated by other needs, referred to by Outcault et al (2022) as ‘non-energy impacts’ (NEIs). While lists of NEIs are inconsistent in the literature, categories related to “weatherization retrofit” refer to comfort, health, safety, and indoor air quality (Outcault et al., 2022). Worldwide retrofit schemes such as RetrofitWorks and EnerPHit use varying metrics to define low carbon retrofit, but their universally adopted focus has been on end-point performance targets, which do not include changes to energy using behaviour and practice (Fawcett, 2014). An example of an end-point performance target is Passivhaus’ refurbishment standard (EnerPHit), which requires a heating demand below 25 kWh/(m²a) in cool-temperate climate zones; zones are categorised according to the Passive House Planning Package (PHPP) (Passive House Institute, 2016).  

Created on 23-05-2022

Author: S.Furman (ESR2)


* This vocabulary consists of definitions of key terms related to the combined research conducted by the 15 early-stage researchers. Each term has multiple definitions, each connected to one of the three main research areas: Design, Construction and Planning; Community Involvement; and Policy and Funding.

The joint construction of this vocabulary allows the researchers' projects to be interwoven. As such, the vocabulary is a tool for conducting transdisciplinary research on affordable and sustainable housing.

Entries are reviewed by RE-DWELL researchers and supervisors. The vocabulary is updated regularly.